534 lbs at 5 '' x 96''
Damn he got forked!!!
Were they not properly loaded, or did they strike something and get knocked loose? Really sad stuff, R.I.P.
@istealcars -1 you sad sad sad little cs'er
That was awesome! one less fucking TARD in the world
@ouch no the tard is the one driving that didn`t insure the load was secured
@lonniems They are both tards, one is just deader than the other
When ever a fork truck is operating there is to be no person with in a 5m radius
That's forked up!!!
Many times as a material handler you'll lift loads that are not really safe, such as this guy. That in itself, while unsafe and should not be done, is always done. Where the guy was seriously disregarding a huge safety rule is to never move a load over someone (or for the other guy, never be under a load), even if the load is properly loaded.
@vulgarme, yep, and never lower the forks without knowing exactly where your load will be placed
Vulgarme the load was not centered on the forks when the fork lift maneuvered the load at the time of accident.
@istealcars It seems the idiot forklift operator dropped the forks too soon.
E-verify your employess. Now you know.
A long time ago he got told "Never stand UNDER heavy weight."
@mr.voorhees or a ladder
@mr.voorhees nah, he was married to an ugly chick and did it on purpose
I'll remember that the next time my wife wants me to hold the ladder for her.
Never stand under the load unless your a pornstar
@hatchetface HA!....das funny.,.,.,
. . never make your joint bigger than you can carry.
Doom by the Boom.
Down for a concrete nap
Would you like 1 lump or 2 ?? 2 okay here you go!
Must have made a hell of a crunch sound.
Yeah...just put that anywhere.
Please supervisor, don't rush to check your driver.
Wanted laborer no experience necessary Wanted fork lift operator EXPERIENCED ONLY
You're dead and you're fired!
Quick! pick up the pipes and we'll say he just fell
Mike was there any information on what type and size of linoleum that was on the fork lift and fell on to the victim...
Deadlines to meet..
I once saw a guy on the skids of a forklift get crushed by a 10 ton press when the operator of the lift hit the wrong lever and tilted the skids up. The press slid back and crushed him as flat as the Asians press my shirts.
Loving the "well crap, let me just pick that back up" attitude he has.
Yes... before the boss gets here
I guess someone getting fired xdxdxdzdx
yeah shocking that the round steel rolled off of the forks going down hill
U GOTTA B "FORKING" KIDDING ME!! LOL